Brief Introduction

CDA2D50-200Z

SMC's cylinder CDA2D50-200Z Key ParametersType: Compact (thin) cylinder (single-rod, double-acting; square compact structure, part of SMC's CDA2 series, balancing thrust and space utilization);Bore Diameter: 50mm (corresponding to "50" in the model; output thrust is approximately 982N at 0.5MPa, suitable for medium-load, medium-long distance actuation requirements);Stroke: 200mm (corresponding to "200" in the model; medium-long stroke design to meet medium-distance linear actuation, balancing operating range and response speed);Built-in Magnetic Ring: Yes (marked by "D"; can be used with magnetic switches to detect piston extension/retraction position in real time for precise automated control);Port Thread: Rc 1/8 (standard small-flow port suitable for medium-load pneumatic circuits, ensuring stable air supply);Pressure Range: 0.1–1.0MPa (pressure resistance: 1.5MPa; compatible with conventional pneumatic system pressures, balancing safety and application suitability);Temperature Range: -10~60℃ (stable operation in non-freezing environments; avoid high temperatures to prevent seal aging and reduced airtightness);Piston Speed: 50-500mm/s (a flow control valve is required to prevent end-impact from high-speed movement in medium-long strokes and protect the cylinder and load);Cushioning Method: Adjustable cushioning (marked by "Z"; cushion adjustment screws are provided at both ends to fine-tune cushioning force according to load weight and movement speed, ensuring smooth deceleration at stroke ends);Mounting Method: "A2" denotes two-sided mounting (standard mounting holes on the front/rear ends and both sides of the cylinder body, allowing horizontal/vertical fixing to meet multi-directional installation requirements).ApplicationsSuitable for automated scenarios with limited installation space requiring medium-load, medium-long stroke actuation, especially for working conditions where cushioning stability is required.